www.cotswoldlifts.co.uk    

 

Cotswold Lifts LTD Company Logo

Products Section Logo
Servicing Section Logo
Contact Section Logo
Company Section Logo

 

Top Right

 

 

 

Typical A5000 Platform Lift Specification

Lift Type A5000
Construction The lift enclosure is fabricated to a very high standard and assembled on site to form a semi self supporting enclosure to all four sides this forms a smooth face to both sides of the enclosure. The enclosure is infilled with composite steel faced panels or glass panels to all three sides.
Flooring Non slip studded rubber, colour grey.
Travel Floor to floor
Capacity 400 Kg
Platform Size 1000 mm wide x 1500 mm long.
Operation Screw driven by variable frequency motor.
Controls Flush mounted rocker pushes 70 mm x 50 mm. Consisting of Call at all landings and up, down, stop and alarm pushes on the lift carriage, the carriage buttons are lit with a 24-v fluorescent light. All controls are constant pressure operation. The lift will stop once the controls are released. Optional On/Off key switch Timed door locking Intercom between lift and lower landing
Entrance's Same side or Through car or Adjacent entry
No of Stops Up to 6 stops.
Location Internal
Pit Depth 50 mm, if no pit is available a shallow ramp can be constructed.
Safety : Equipment: Emergency Manual lowering device via external hand crank, pit stop switch. All gates and doors are fitted with electro mechanical inter locks to prevent them being opened with the lift away form the relevant landing. All moving parts have sensitive edges on them to eliminate trapping.
Power Supply Dedicated 1 phase 230 volt, via a lockable switch fused spur rated at 20 amps.
Control Voltage 24 volts dc.
Doors Fitted at all landings.Standard configuration. Single swing manually operated with a self-closer. Door clear entry 2000 mm high and 900 mm wide. Door style single vision panel.Optional. Fully glazed. Three panel. Fire resistant.And powered door operators
Finish Carriage spray painted metallic grey, all other steelwork finished in high quality semi gloss primer to RAL 9010.Optional finish to any RAL colour.

 

 

Lift Cert Approvial
ISO 9001 Registered